ToughMet® Copper Nickel Tin Alloy

1. ToughMet 3 TS Alloy Rod, Tube and Wire - Data Sheet

   ToughMet 3 TS Alloy is a cold worked, spinodally hardened alloy designed to provide high strength for the most demanding static structural loads and pressures.

2. ToughMet 2 Strip Advanced Bearing Technology

   Materion’s ToughMet 2 material is a high-performance, wrought, heat treatable, lead-free strip alloy that imparts superior mechanical performance and high thermal stability to plain bearing applications.

3. ToughMet® 3 A Strip Data Sheet

   ToughMet 3 A Strip is a high-performance, spinodal copper- nickel-tin alloy designed to provide optimal formability and tribological characteristics when fully heat treated.

4. ToughMet 3 Sucker Rod Couplings Brochure

   ToughMet 3 Sucker Rod Couplings are the most cost effective solution for eliminating production interruptions caused by sucker rod coupling and production tubing failures. This can lead to lower production costs and fewer workovers.

5. ToughMet and Alloy 25 - Brochure

   ToughMet copper nickel tin alloys are engineered to provide attributes beyond those typically found in high-strength copper alloys, especially in the high temperature, high pressure regime.

6. ToughMet 3 TS95 Valve Rod Guide Bushing Coupling Brochure

   The ToughMet 3 Valve Rod Guide Bushing Coupling eliminates production interruptions in artificial lift systems, by reducing HIT failures in an area prone to extreme rod buckling and tubing wear.

7. ToughMet - Tough Bearing Material for Problematic Bearing Applications

   ToughMet® Alloy is engineered to solve problems with premature adhesive or abrasive wear, edge, uneven loading, pin deflection, galling and corrosion in plain, sliding and thrust bearings.

8. Testing Report: ToughMet Alloy Comparison

   Crawford Engineering and Consulting, LLC., put together a report showing how ToughMet 3, ToughMet 2, and manganese bronze performed under Vickers microhardness testing.

9. Testing Report: ToughMet Alloy Comparison Executive Summary

   We recently partnered with an independent engineering firm to produce a comparative report of ToughMet wear and friction data - read our executive summary of the findings.

10. ToughMet® 2 CX Rod Tube Plate

    ToughMet 2 alloy in the cast and spinodally hardened (CX) condition was engineered to provide attributes beyond those typically found in a high-strength copper alloy.

11. ToughMet® 2 Product Brief

    The ToughMet 2 material is a high performance, cost effective copper-nickel-tin alloy solution engineered to hold up to heavy-duty use.

12. ToughMet® 3 Alloy Wire

    ToughMet 3 Alloy is a performance, heat treatable, copper-nickel-tin alloy designed for severe service applications.

13. ToughMet® 3 AT Alloy Rod Tube and Forged Rings

    ToughMet 3 AT alloy is a wrought, spinodally hardened copper alloy engineered for high strength and hardness.

14. ToughMet 3 AT110 Plate - Data Sheet

    ToughMet is engineered to provide attributes beyond those typically found in a high-strength copper alloy.

15. ToughMet® 3 TS Alloy Plate and Flat Products Data Sheet

    Materion’s ToughMet 3 TS alloy is a cold worked, spinodally hardened alloy with properties designed for the most demanding dynamic loading applications.

16. ToughMet 3 AT110 Rod and Tube - Data Sheet

    ToughMet® 3 AT110 demonstrates excellent stability of tensile properties at elevated temperatures along with superior fatigue strength.

17. ToughMet Elmore Site Case Study

    Reducing wear and downtime at the Elmore facility with ToughMet® copper nickel tin alloy.

18. ToughMet 3 CX Tempers Rod and Tube - Data Sheet

    ToughMet 3 CX Rod and Tube - Data Sheet